43_03_2_搭建LNMP

环境说明

192.168.122.7          web php
192.168.122.220        mysql

编译安装nginx

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
#tar xf nginx-1.9.2.tar.gz 
#groupadd -r -g 492 nginx 
#useradd -r -g 492 -u 492 nginx 
 
#yum install pcre-devel  openssl-devel gd-devel 
#mkdir -pv /var/tmp/nginx/client 
 
编译和安装 
./configure \ 
--prefix=/usr \ 
--sbin-path=/usr/sbin/nginx \ 
--conf-path=/etc/nginx/nginx.conf \ 
--error-log-path=/var/log/nginx/error.log \ 
--http-log-path=/var/log/nginx/access.log \ 
--pid-path=/var/run/nginx/nginx.pid \ 
--lock-path=/var/lock/nginx.lock \ 
--user=nginx \ 
--group=nginx \ 
--with-http_ssl_module \ 
--with-http_flv_module \ 
--with-http_stub_status_module \ 
--with-http_gzip_static_module \ 
--http-client-body-temp-path=/var/tmp/nginx/client/ \ 
--http-proxy-temp-path=/var/tmp/nginx/proxy/ \ 
--http-fastcgi-temp-path=/var/tmp/nginx/fcgi/ \ 
--http-uwsgi-temp-path=/var/tmp/nginx/uwsgi \ 
--http-scgi-temp-path=/var/tmp/nginx/scgi \ 
--with-file-aio \ 
--with-http_image_filter_module \ 
--with-pcre\ 
 --with-http_mp4_module 
#make && make install 
 
 
#chmod +x /etc/rc.d/init.d/nginx 
#chkconfig --add nginx 
#chkconfig nginx on 
#service nginx start

二、测试nginx
测试内容如下： 

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
#vim /etc/nginx/nginx.conf 
 
worker_processes  1; 
error_log  /var/log/nginx/error.log;         //由于nginx根目录指向/usr,所以我在这里加了绝对路径；； 
events { 
    worker_connections  1024; 
} 
http { 
    include       mime.types; 
    default_type  application/octet-stream; 
    sendfile        on; 
    keepalive_timeout  65; 
    server { 
        listen       80; 
        server_name  localhost; 
        location / { 
            root   html; 
            index  index.html index.htm; 
        } 
     
    location /status { 
        stub_status on; 
        auth_basic "Need password";　　　　　　　　　　　//nginx状态路径，可以使用ab -c 1000 -n 1000 http://IP/index.html进行查看 
        auth_basic_user_file /etc/nginx/.users;　　　　　　　//htpasswd -c -m /etc/nginx/.users tom 
    } 
        error_page  404              /404.html; 
        error_page   500 502 503 504  /50x.html; 
        location = /50x.html { 
            root   html; 
        } 
    } 
    server { 
        listen       443 ssl; 
    server_name  localhost; 
        ssl_certificate      /etc/nginx/ssl/nginx.crt; 
        ssl_certificate_key  /etc/nginx/ssl/nginx.key; 
        ssl_session_cache    shared:SSL:1m; 
        ssl_session_timeout  5m; 
        ssl_ciphers  HIGH:!aNULL:!MD5; 
        ssl_prefer_server_ciphers  on; 
        location / { 
            root   html; 
            index  index.html index.htm; 
        } 
    } 
}

编译安装PHP

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
 yum -y install libxml2-devel bzip2-devel libcurl-devel libmcrypt-devel 
 
tar xf php-5.6.12.tar.bz2 
./configure --prefix=/usr/local/php --with-openssl --enable-fpm --enable-sockets --enable-sysvshm --enable-mbstring --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir --enable-xml --with-mhash --with-mcrypt --with-config-file-scan-dir=/etc/php.d --with-bz2 --with-config-file-path=/etc --with-curl --with-mysql=mysqlnd --with-pdo-mysql=mysqlnd --with-mysqli=mysqlnd 
 
make && make install 
 
[root@nfs php-5.6.12]# cp php.ini-production /etc/php.ini 
[root@nfs php-5.6.12]# cp sapi/fpm/init.d.php-fpm /etc/rc.d/init.d/php-fpm 
[root@nfs php-5.6.12]# chmod +x /etc/rc.d/init.d/php-fpm 
[root@nfs php-5.6.12]# chkconfig --add php-fpm 
[root@nfs php-5.6.12]# chkconfig php-fpm on 
[root@nfs php-5.6.12]# cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf 
[root@nfs php-5.6.12]# vim /usr/local/php/etc/php-fpm.conf 
pm.max_children=50 
pm.start_servers=5 
pm.min_spare_servers=2 
pm.max_spare_servers=8 
pid=/usr/local/php/var/run/php-fpm.pid 
[root@nfs php-5.6.12]# service php-fpm start

整合nginx和php

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
[root@nfs php-5.6.12]# vim /etc/nginx/nginx.conf 
 
①编辑/etc/nginx/nginx.conf，启用如下选项: 
location ~ \.php${ 
    root                html; 
    fastcgi_pass     127.0.0.1:9000; 
    fastcgi_index    index.php; 
    fastcgi_param  SCRIPT_FILENAME /scripts$fastcgi_script_name; 
    include              fastcgi_params;     
} 
②编辑/etc/nginx/fastcgi_params,将其内容改为如下内容: 
 
fastcgi_param      GATEWAY_INTERFACE   CGI/1.1; 
fastcgi_param      SERVER_SOFTWARE        nginx; 
fastcgi_param      QUERY_STRING               $query_string; 
fastcgi_param      REQUEST_METHOD         $request_method; 
fastcgi_param      CONTENT_TYPE               $content_type; 
fastcgi_param      CONTENT_LENGTH         $content_length; 
fastcgi_param      SCRIPT_FILENAME          $document_root$fastcgi_script_name; 
fastcgi_param      SCRIPT_NAME                 $fastcgi_script_name; 
fastcgi_param      REQUEST_URI                  $request_uri; 
fastcgi_param      DOCUMENT_URI            $document_uri; 
fastcgi_param      DOCUMENT_ROOT        $document_root; 
fastcgi_param      SERVER_PROTOCOL       $server_protocol; 
fastcgi_param      REMOTE_ADDR               $remote_addr; 
fastcgi_param      REMOTE_PORT                $remote_port; 
fastcgi_param      SERVER_ADDR                 $server_addr; 
fastcgi_param      SERVER_PORT                  $server_port; 
fastcgi_param      SERVER_NAME                $server_name; 
 
并在所支持的主页面格式中添加php格式的主页，类似如下: 
location / { 
        root html; 
        index index.php index.html index.htm; 
} 
 
service nginx restart 
 
会发现，当用https访问主页时，发现是下载index.php,说明php-fpm没有处理php文件，那么在https server 段内加入： 
如下所示，即可；； 
server { 
        listen       443 ssl; 
        server_name  localhost; 
        ssl_certificate      /etc/nginx/ssl/nginx.crt; 
        ssl_certificate_key  /etc/nginx/ssl/nginx.key; 
 
        ssl_session_cache    shared:SSL:1m; 
        ssl_session_timeout  5m; 
 
        ssl_ciphers  HIGH:!aNULL:!MD5; 
        ssl_prefer_server_ciphers  on; 
 
        location / { 
            root   html; 
            index  index.html index.htm index.php; 
        } 
        location ~ \.php$ { 
            root           html; 
            fastcgi_pass   127.0.0.1:9000; 
            fastcgi_index  index.php; 
            fastcgi_param  SCRIPT_FILENAME  /scripts$fastcgi_script_name; 
            include        fastcgi_params; 
        } 
    } 
```                  
 
## 安装xcache插件 
 
```bash
[root@nfs ~]# tar xf xcache-3.2.0.tar.gz 
[root@nfs xcache-3.2.0]# /usr/local/php/bin/phpize 
[root@nfs xcache-3.2.0]# ./configure --enable-xcache --with-php-config=/usr/local/php/bin/php-config 
[root@nfs xcache-3.2.0]# make &&make install 
[root@nfs xcache-3.2.0]# mkdir /etc/php.d/ 
[root@nfs xcache-3.2.0]# cp xcache.ini /etc/php.d/ 
[root@nfs xcache-3.2.0]# service php-fpm restart

安装phpMyadmin

1
2
3
4
5
6
[root@nfs pma]# unzip phpMyAdmin-4.4.14-all-languages.zip 
[root@nfs pma]# cp -a phpMyAdmin-4.4.14-all-languages /usr/html/pma 
[root@nfs pma]# cd /usr/html/pma/ 
[root@nfs pma]# cp config.sample.inc.php config.inc.php 
[root@nfs pma]# vim config.inc.php 
$cfg['Servers'][$i]['host'] = '192.168.122.220';

然后这两种方式都可；；
http://192.168.122.7/pma
https://192.168.122.7/pma 

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
[root@node1 ~]# cat /etc/rc.d/init.d/nginx 
#!/bin/sh 
# 
# nginx - this script starts and stops the nginx daemon 
# 
# chkconfig:   - 85 15 
# description:  Nginx is an HTTP(S) server, HTTP(S) reverse \ 
#               proxy and IMAP/POP3 proxy server 
# processname: nginx 
# config:      /etc/nginx/nginx.conf 
# pidfile:     /var/run/nginx/nginx.pid 
 
# Source function library. 
. /etc/rc.d/init.d/functions 
 
# Source networking configuration. 
. /etc/sysconfig/network 
 
# Check that networking is up. 
[ "$NETWORKING" = "no" ] && exit 0 
 
nginx="/usr/sbin/nginx" 
prog=$(basename $nginx) 
 
lockfile="/var/lock/nginx.lock" 
pidfile="/var/run/nginx/${prog}.pid" 
 
NGINX_CONF_FILE="/etc/nginx/nginx.conf" 
 
 
 
start() { 
    [ -x $nginx ] || exit 5 
    [ -f $NGINX_CONF_FILE ] || exit 6 
    echo -n $"Starting $prog: " 
    daemon $nginx -c $NGINX_CONF_FILE 
    retval=$? 
    echo 
    [ $retval -eq 0 ] && touch $lockfile 
    return $retval 
} 
 
stop() { 
    echo -n $"Stopping $prog: " 
    killproc -p $pidfile $prog 
    retval=$? 
    echo 
    [ $retval -eq 0 ] && rm -f $lockfile 
    return $retval 
} 
 
restart() { 
    configtest_q || return 6 
    stop 
    start 
} 
 
reload() { 
    configtest_q || return 6 
    echo -n $"Reloading $prog: " 
    killproc -p $pidfile $prog -HUP 
    echo 
} 
 
configtest() { 
    $nginx -t -c $NGINX_CONF_FILE 
} 
 
configtest_q() { 
    $nginx -t -q -c $NGINX_CONF_FILE 
} 
 
rh_status() { 
    status $prog 
} 
 
rh_status_q() { 
    rh_status >/dev/null 2>&1 
} 
 
# Upgrade the binary with no downtime. 
upgrade() { 
    local oldbin_pidfile="${pidfile}.oldbin" 
 
    configtest_q || return 6 
    echo -n $"Upgrading $prog: " 
    killproc -p $pidfile $prog -USR2 
    retval=$? 
    sleep 1 
    if [[ -f ${oldbin_pidfile} && -f ${pidfile} ]];  then 
        killproc -p $oldbin_pidfile $prog -QUIT 
        success $"$prog online upgrade" 
        echo 
        return 0 
    else 
        failure $"$prog online upgrade" 
        echo 
        return 1 
    fi 
} 
 
# Tell nginx to reopen logs 
reopen_logs() { 
    configtest_q || return 6 
    echo -n $"Reopening $prog logs: " 
    killproc -p $pidfile $prog -USR1 
    retval=$? 
    echo 
    return $retval 
} 
 
case "$1" in 
    start) 
        rh_status_q && exit 0 
        $1 
        ;; 
    stop) 
        rh_status_q || exit 0 
        $1 
        ;; 
    restart|configtest|reopen_logs) 
        $1 
        ;; 
    force-reload|upgrade) 
        rh_status_q || exit 7 
        upgrade 
        ;; 
    reload) 
        rh_status_q || exit 7 
        $1 
        ;; 
    status|status_q) 
        rh_$1 
        ;; 
    condrestart|try-restart) 
        rh_status_q || exit 7 
        restart 
        ;; 
    *) 
        echo $"Usage: $0 {start|stop|reload|configtest|status|force-reload|upgrade|restart|reopen_logs}" 
        exit 2 
esac
赏

谢谢你请我吃糖果

支付宝

扫一扫，分享到微信

微信分享二维码

tag:

    缺失模块。
    1、请确保node版本大于6.2
    2、在博客根目录（注意不是yilia根目录）执行以下命令：
    npm i hexo-generator-json-content --save

    3、在根目录_config.yml里添加配置： 

      jsonContent:
    meta: false
    pages: false
    posts:
      title: true
      date: true
      path: true
      text: false
      raw: false
      content: false
      slug: false
      updated: false
      comments: false
      link: false
      permalink: false
      excerpt: false
      categories: false
      tags: true

探索世界美好的存在。